<img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=672348691155252&amp;ev=PageView&amp;noscript=1">
Skip to content
  • There are no suggestions because the search field is empty.

How to Install the Battery in DuraLabel Toro Max

Toro Max's battery is an optional accessory. The Lithium-Ion (Li-ion) battery lets you design and print labels on the go, even without an AC power supply. Typically, a fully charged battery will allow for up to 3 hours of use in the field.

Installing battery in ToroMax

 

Overview

Toro Max's battery is an optional accessory. The Lithium-Ion (Li-ion) battery lets you design and print labels on the go, even without an AC power supply. Typically, a fully charged battery will allow for up to 3 hours of use in the field.

Battery Loading

The battery mounts into the back of the Toro Max. Remove the battery cover door by pushing the slider downward and pulling the door away. Position the battery so the cut-outs are aligned and the contacts are in position with the contact interface. Push the battery in until it locks into place, and return the battery cover door to its position.

battery-loading-duralabel-toro-max

Charging the Battery

The Toro Max battery charges automatically while it is loaded into the printer and the system is plugged in with its AC Adapter. Charging will continue whether the system is powered on or off, and will stop automatically when the battery is fully charged. No separate charger is needed, and the battery does not need to be removed from the system. The battery can usually be fully recharged in about three hours.

Battery Maintenance

Because Lithium batteries self-discharge over time, it is recommended that you fully recharge the battery at least once every three months. When the battery is not in use, keep it in a cool, dry place, away from heat or direct sunlight. Do not disassemble your Toro battery. Do not let the metal battery pins come into contact with another metal surface. If you notice any unusual odor, leakage, or swelling in the Toro battery, discontinue use and contact your DuraLabel representative.

Older Batteries

If you have a battery for the original DuraLabel Toro system, do not use it in the Toro Max, as the older battery was designed to use a separate charging system. Contact your DuraLabel representative for more information.

Please reach out to us with any further comments or questions at:

DuraLabel Support Number: +1 (888) 788-5572
DuraLabel Support: https://duralabel.com/support/
DuraLabel YouTube: https://www.youtube.com/@DuraLabelbyGP
DuraLabel Printers & Supplies: https://duralabel.com/printers-and-supplies/